Pump Wear Sleeves Assembled Using
Loctite® RC™ 609 Retaining Compound

Cutting the expense in half while producing a quieter-running, longer-living assembly.

On sleeve bearing pumps, normal procedure dictates that they be hardened and ground to achieve long life. Hardening tends to warp a shaft, and where long warped shafts have to be corrected by grinding, tremendous expense can be experienced. Once warpage has occurred, key fitted ends and impeller threads can never be economically corrected. One of our customers decided to put an end to this expensive operation and chose a new approach using Loctite RC 609 retaining compound.

Read the whole application story >>
DateJuly 14th, 2009 | CategoriesRetaining | Tags: , , , , , , , ,
CommentsNo Comments » | Email this Email this |
1 Star2 Stars3 Stars4 Stars5 Stars (No Ratings Yet)
Loading ... Loading ...

Loctite® Anaerobics Designed Into Arctic Cat
Snowmobiles for Superior Performance

Loctite® Anaerobics Designed Into Arctic Cat Snowmobiles for Superior Performance: Arctic Cat depends on Loctite products for many different applications on their entire line of high-performanceZ snowmobiles.

Loctite Corporation has been a partner in design with Arctic Cat since the beginning for their line of snowmobiles and personal watercraft. When they began to design their 1999 line of snowmobiles they naturally called Loctite in to be a part of the team. Loctite brought extensive experience to the table and recommended the right products for each application, such as Loctite® 242® Removable Threadlocker, Loctite® 290 Wicking Grade Threadlocker, Loctite® RC™ 609 and RC™ 620, Black Max®380 and Super Lube®. From the drive clutch to brake caliper bolts to the starter assembly, its products are used throughout the snowmobile to protect against vibration loosening and temperature extremes.

Read the whole application story >>
DateApril 17th, 2009 | CategoriesThreadlocking | Tags: , , , , , , , , , , ,
CommentsNo Comments » | Email this Email this |
1 Star2 Stars3 Stars4 Stars5 Stars Currently rated 17 by 4 user(s)
Loading ... Loading ...

Loctite® 609 Retaining Compound Outlasts
The Bearings In Dental Handpiece

Loctite® 609 Retaining Compound Outlasts The Bearings In Dental Handpiece: Ney Dental relies on Loctite 609 to bond the turbine assembly of its new handpiece. In fact, Loctite® RC ™ 609 Retaining Compound is now used on all their slip fit assemblies with gaps of .002
RC™ 609 Makes Extending the Life of the Product Easy
Ney manufactures looking for a way to bond the turbine assembly, a subassembly of the handpiece, which when air hits it, makes the shaft spin. Loctite Retaining Compounds fit the bill. Loctite® RC™ 609 is a low viscosity, rapid-curing liquid. It augments the strength of press-fit assemblies and can be used on slip fits up to “005″ diametrical clearance. RC 609 fixtures in 10 minutes on unprimed steel at room temperature, providing a shear strength of 3000 psi at full cure.

Read the whole application story >>
DateApril 17th, 2009 | CategoriesRetaining | Tags: , , , , , ,
Comments3 Comments » | Email this Email this |
1 Star2 Stars3 Stars4 Stars5 Stars Currently rated 22 by 5 user(s)
Loading ... Loading ...


沪ICP备10028897号